A pre-blended cementitious plugging mortar designed for sealing wall ties
PQX Cement
A quick setting ultra-rapid hardening cement for use in producing concrete for the rapid repair and replacement or construction of concrete roads and airfields where time is limited.
High Performance Plugging Mortar
A rapid setting putty, used as a plugging mortar for below the waterline repair work to concrete and brick structures.
Pressure Pointing Mortar Range
A range of high-performance cement mortars designed for mechanical pressure pointing and hand repointing and renovation of masonry and stone substrates prior to grouting.
Rapid Set Mortar
A fast setting, high bond pointing and repair mortar designed for structural repairs to concrete. When mixed with water it produces a putty-like mortar with excellent wash out resistance and a powerful bond onto wet concrete substrates.
Easy Patch Mortar
A fast setting, high bond mortar designed for structural repairs to concrete in highways, rail, marine and civil engineering environments.
High Performance Repair Mortar
A pre-blended, one part cement based concrete repair mortar, specifically designed for hand applied concrete repairs.
Cemrok Dry Spray Concrete
Pozament’s Cemrok Dry Spray Concrete is available in low, moderate and high strengths and in standard, accelerated, and highly accelerated grades. Polypropylene or steel fibres can also be incorporated into the Dry spray concrete mix for additional strength and crack resistance.
Cemrok Wet Spray Concrete
Pozament’s Cemrok Wet Spray Concrete range is available in low, moderate and high strengths. Polypropylene or steel fibres can also be incorporated into the wet spray concrete mix for additional strength and crack resistance.
Rapid Set Flowing Repair Concrete
Pozament Rapid Set Flowing repair concrete is a fast setting repair concrete designed for fast, efficient concrete repairs in critical environments to minimise site closures, delays and operational disruption. It has an initial initial set time of just 15-25 minutes, achieves a strength of 29 N/mm2 after 2 hours and can enable a return to service in under 2 hours.
- Page 1 of 2
- 1
- 2
