Flowing Repair Concrete CP

Pozament Flowing Repair Concrete CP is a high strength, shrinkage compensated, chloride free, low permeability repair concrete. It contains a blend of low alkali Portland cements, micro-silica and other cementitious binders combined with high purity limestone aggregates and a system of compatible admixtures.
Image
Benefits

Why use Pozament Flowing Repair Concrete CP

Pozament Flowing Repair Concrete CP is a high strength structural repair concrete that achieves compressive strengths of 25 N/mm2 after 1 day, 50 N/mm2 after 7 days and 60 N/mm2 after 28 days. It achieves a flexural strength of 4.0 N/mm2 after 1 day, 7.5 N/mm2 after 7 days and 9.0 N/mm2 after 28 days.
Pozament Flowing Repair Concrete CP is chloride free and has low permeability, which prevents ingress of chlorides, acid gases and water. This makes it suitable for repairing steel reinforced concrete and protective of steel components.
Pozament Flowing Repair Concrete CP is suitable for repair of corroded steel reinforced concrete and installation of cathodic protection systems to prevent further damage or deterioration. It has an electrical resistivity of 9000Ohm.cm at 28 days (see technical datasheet).


Applications

Where can Pozament Flowing Repair Concrete CP be used?

Flowing repair concrete for civil engineering

High compressive and flexural strength combined with low permeability makes Pozament Flowing Repair Concrete CP suitable for a wide range of civil engineering maintenance and repair applications.
Flowing repair concrete for highways

Flowing Repair Concrete CP has been independently tested by UKAS Lab for compliance to D.o.T. Highways Agency Spec BD27/86. Vol.3, Sect 3, Chapter 4 Clause 4.6. It is suitable for concrete repairs in a range of road and highways applications.
Class R4 Structural Repair Concrete to BS EN 1504

Pozament Flowing Repair Concrete CP meets BS EN 1504 requirements for Class R4 structural repair concretes.

Repair concrete for cathodic protection

Pozament Flowing Repair Concrete CP is suitable for installation of cathodic protection systems to protect steel reinforced concrete.

Concrete for structural repairs to bridges

Flowing Repair Concrete CP is suitable for structural bridge repairs to bridge columns, bridge beams and bridge decks. Tarmac also supply a range of asphalts specifically designed for concrete overlays (Ultilayer SAMI).
Product comparison table


Performance
Image
Precision Grout - PG
Image
High Strength - HS
Image
Rapid - R



Benefit
Workability/flow retention
High ultimate strength
Fast setting/Rapid strength gain



Workability time
30 mins
15 mins
5 mins



Compressive Strength

60 minutes
-
-
2.5 N/mm2

90 minutes
-
-
20 N/mm2

120 minutes
-
-
25 N/mm2

1 day
15 N/mm2
45 N/mm2
40 N/mm2

7 days
40 N/mm2
70 N/mm2
52 N/mm2

28 days
55 N/mm2
85 N/mm2
70 N/mm2

Tested to BS EN 1504-3
Yes
Yes
Yes

Product Downloads

For full technical details download the technical data sheet.


Get in touch
Our experienced technical team are available to advise on selection of materials to make sure our clients get right solution to meet the challenges of the site and achieve the best possible result.

Get a quote
First
Last
Email
Phone
Opt in
We would like to keep in contact with you about products and services we offer. If you wish to join our email list please tick the box to opt in.

Bespoke
grouts, mortars,
and concretes


Image
Developing custom designed material solutions for the most challenging projects and site conditions

Find out more

Pozament Heritage

Pozament have been helping civil engineers solve some of the most challenging problems for over 30 years.

Our specialist high performance grouts for have been used on projects like London’s Crossrail and construction of the Shard.

Read more in our case studies.

Learn More
Crossrail
Renewing
Britain's roads

Specialist cements, mortars, grouts,
and concretes to build, maintain
and upgrade the UK road network